VVT Sensor: Removal

REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE AIR CLEANER ASSEMBLY LH
1. Disconnect the MAF meter connector.
2. Remove the 2 clips, hose clamp and air cleaner cap.
  
  Fig 1: Locating Hose Clamp Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the element from the air cleaner case.
4. Remove the 2 nuts, clip and air cleaner case.
  
  Fig 2: Locating Air Cleaner Case Clip And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE AIR CLEANER ASSEMBLY
1. Disconnect the MAF meter connector.
2. Remove the 2 clips, hose clamp and air cleaner cap.
3. Remove the element from the air cleaner case.
  
  Fig 3: Locating Air Cleaner Cap Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the 2 nuts, clip and air cleaner case.
  
  Fig 4: Locating Air Cleaner Case Clip And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR
1. Disconnect the 4 VVT sensors.
2. Remove the 4 bolts and 4 VVT sensors.
  
  Fig 5: Locating VVT Sensors And Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002