LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> LS 460L >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Front Acceleration Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Acceleration Sensor: Installation

  1. INSTALL ACCELERATION SENSOR ASSEMBLY 
    1. Install the acceleration sensor with bracket to instrument panel reinforcement with the bolt.

      Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf) 

      Fig 1: Identifying Acceleration Sensor
      G04944234Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:
      • Avoid any impact to the acceleration sensor.
      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
    2. Connect the sensor connector.
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY  (See INSTALLATION )
  3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY  (See INSTALLATION )
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See INSTALLATION )
  5. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING  (See INSTALLATION )
  6. INSTALL INSTRUMENT SIDE PANEL LH  (See INSTALLATION )
  7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  8. INSTALL COWL TOP VENTILATOR LOUVER RH  (See INSTALLATION )
  9. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  10. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals