Floor Shift Assembly: Inspection
- INSPECT TRANSMISSION CONTROL SWITCH
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTTester Connection Shift Lever Position Specified Condition 3(IG)-7(S) S, "+" and "-" Below 1 Ω 2 (SFTU) - 5 (E) Continuously shift to "+" (Up-shift) Below 1 Ω 1 (SFTD) - 5 (E) Continuously shift to "-" (Down-shift) Below 1 Ω 3 (IG) - 7 (S) Not on S, "+" and "-" 10 kΩ or higher 2 (SFTU) - 5 (E) S 10 kΩ or higher 1 (SFTD) - 5 (E) S 10 kΩ or higher If the resistance value is not as specified, replace the transmission floor shift assembly.
- Measure the resistance between each terminal of the shift lock control unit assembly when the shift lever is moved to each position.