Accelerator Pedal Position Sensor: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
REMOVE ACCELERATOR PEDAL
1. Disconnect the accelerator pedal position sensor connector.
2. Remove the 2 bolts and accelerator pedal.
  NOTE:
  - Do not drop or strike the accelerator pedal.
  - Do not disassemble the accelerator pedal.
    
    Fig 1: Locating Bolts And Accelerator Pedal
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002