Engine Control System (2UZ-FE): ECM: Installation

INSTALL ECM ASSEMBLY
1. Install the ECM with the 3 screws.
  Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
  
  Fig 1: Locating Screws And ECM
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 5 ECM connectors.
  NOTE: Be sure to securely connect the connectors.
INSTALL NO. 2 FINISH PANEL LOWER
1. Install the No. 2 finish panel lower with the 3 screws.
  
  Fig 2: Locating Screws And No. 2 Finish Panel Lower
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL GLOVE BOX COMPARTMENT DOOR
1. Install the glove compartment door with the 2 screws.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
Perform initialization (see INITIALIZATION ).

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.