Front Speed Sensor: Removal

HINT:

• Use the same procedures for the RH side and the LH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL 
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH  (See REMOVAL )
3. REMOVE FRONT SPEED SENSOR 
   1. Disconnect the speed sensor connector.
   2. Remove the 2 bolts and the clamp from the body and the shock absorber assembly.
      Fig 1: Identifying Bolts & Clamp

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Remove the bolt and the speed sensor front.
      NOTE: Prevent foreign matter from attaching to the sensor tip.