Accelerator Pedal Rod: Installation

INSTALL ACCELERATOR PEDAL ROD
NOTE:
- Avoid physical shock to the accelerator pedal assembly.
- Do not disassemble the accelerator pedal assembly.
  
  Fig 1: Locating Accelerator Pedal Position Sensor Connector And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
1. Install the accelerator pedal rod with the 2 nuts.
  Torque: 4.9 N*m (50 kgf*cm, 43 in.*lbf)
2. Connect the accelerator pedal position sensor connector.
INSTALL FLOOR CARPET COVER CENTER LH

Fig 2: Locating Accelerator Pedal Position Sensor Connector And Nuts
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002