Throttle Body: Installation

INSTALL THROTTLE BODY
1. Install a new throttle body gasket to the intake air surge tank.
  
  Fig 1: Identifying Recess
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the throttle body with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 2: Locating Throttle Body Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 water by-pass hoses.
  
  Fig 3: Locating Throttle Body Water By-Pass Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the throttle body connector and clamp.
INSTALL AIR CLEANER CASE SUB-ASSEMBLY (See INSTALLATION )

Fig 4: Locating Throttle Body Connector And Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CAP SUB-ASSEMBLY
1. Install the air cleaner cap sub-assembly with the 2 bolts.
  
  Fig 5: Locating Air Cleaner Cap Sub-Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the vacuum hose (EVAP) to the air cleaner hose.
3. Install the ventilation hose No. 2 and air cleaner hose band.
  
  Fig 6: Locating No. 2 Ventilation Hose And Air Cleaner Hose Band
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Connect the 3 vacuum hoses.
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL NO. 2 AIR CLEANER INLET (See INSTALLATION )
ADD ENGINE COOLANT (See ON-VEHICLE INSPECTION )
CHECK FOR ENGINE COOLANT LEAKS (See ON-VEHICLE INSPECTION )
INSTALL COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )

Fig 7: Locating Vacuum Hoses
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL COWL TOP OUTER PANEL SUB-ASSEMBLY (See INSTALLATION )
INSTALL WINDSHIELD WIPER LINK ASSEMBLY
HINT:

(See INSTALLATION )