LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Crankshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal

  1. REMOVE ENGINE UNDER COVER NO.1  (See REMOVAL )
  2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH 
    1. Remove the screw, and then open the front fender splash shield sub-assembly RH.
    Fig 1: Locating Screw, And Front Fender Splash Shield Sub-Assembly RH
    G05275766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE FRONT FENDER APRON SEAL RH 
    1. Remove the clip and 2 bolts, and then remove the front fender apron seal RH.
    Fig 2: Locating Clip, Bolts And Apron Seal
    G05245510Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE CRANKSHAFT POSITION SENSOR 
    1. Disconnect the crankshaft position sensor connector.
    2. Remove the bolt, and then remove the crankshaft position sensor.
    Fig 3: Locating Crankshaft Position Sensor With Bolt
    G05245825Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals