VVT Sensor Components: Installation

INSTALL VVT SENSOR (for Bank 1)
1. Apply a light coat of engine oil to the O-ring on the VVT sensor (Bank 1).
2. Install the VVT sensor (Bank 1) with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
3. Connect the VVT sensor (Bank 1) connector.
Fig 1: Locating VVT Sensor (Bank 1) With Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VVT SENSOR (for Bank 2)
1. Apply a light coat of engine oil to the O-ring on the VVT sensor (Bank 2).
2. Install the VVT sensor (Bank 2) with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
3. Connect the VVT sensor (Bank 2) connector.
  
  Fig 2: Locating VVT Sensor (Bank 2) Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Install the heated oxygen sensor connector (Bank 2) to the wire harness bracket.
INSTALL AIR CLEANER CAP W/ INLET (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )