Inspection Procedure

1. Reset the power window regulator motor (see INITIALIZATION  ).
2. Check if the power window AUTO UP / DOWN function operates normally.

   OK: AUTO UP / DOWN function operates normally. 

OK: END 

NG: Go to Next Step 

1. Remove the door glass (see ON-VEHICLE INSPECTION ).
2. Operate the door window regulator using the switch.
3. Check if the door window regulator operates smoothly.

   OK: Door window regulator operates smoothly. 

NG: REPLACE DOOR WINDOW REGULATOR 

OK: REPLACE DOOR GLASS RUN (ADJUST DOOR GLASS)