LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Data List / Active Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data List / Active Test

  1. READ DATA LIST 

    HINT:

    Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

    1. Connect the intelligent tester to the DLC3.
    2. Turn the ignition switch ON.
    3. Read the DATA LIST.

      Multiplex network door ECU front LH (Driver door ECU): (Switch condition) 

      ITEM MEASUREMENT NORMAL CONDITION CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      P/W AUTO SW Driver side power window AUTO operation ON / OFF ON: Driver door power window
      AUTO switch operates
      OFF: Driver door power window
      AUTO switch does not operate      		 -
      P/W AUTO SW Passenger side power window AUTO operation ON / OFF ON: Passenger door remote power window AUTO switch operates
      OFF: Passenger door remote power window AUTO switch does not operate      		 -
      LIMIT SW Jam protection limit switch ON / OFF ON: Jam protection limit switch operates
      OFF: Jam protection limit switch does not operate      		 -

      Multiplex network door ECU front LH (Driver door ECU): (Glass position) 

      ITEM MEASUREMENT NORMAL CONDITION CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      GLASS POS - 1/4 Glass position (Fully closed - 1/4 open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
      GLASS POS - 2/4 Glass position (1/4 open - 2/4 open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
      GLASS POS - 3/4 Glass position (2/4 open - 3/4 open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
      GLASS POS - OPEN Glass position (3/4 open - Fully open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -

      Multiplex network door ECU front RH (Passenger door ECU): (Switch condition) 

      ITEM MEASUREMENT NORMAL CONDITION CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      P/W AUTO SW Passenger side power window AUTO operation ON / OFF ON: Passenger door power window AUTO switch operates
      OFF: Passenger door power window AUTO switch does not operate      		 -
      LIMIT SW Jam protection limit switch ON / OFF ON: Jam protection limit switch operates
      OFF: Jam protection limit switch does not operate      		 -

      Multiplex network door ECU front RH (Passenger door ECU): (Glass position) 

      ITEM MEASUREMENT NORMAL CONDITION CHART

      Item Measurement Item / Display (Range) Normal Condition Diagnostic Note
      GLASS POS - 1/4 Glass position (Fully closed - 1/4 open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
      GLASS POS - 2/4 Glass position (1/4 open - 2/4 open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
      GLASS POS - 3/4 Glass position (2/4 open - 3/4 open) OK / CAUTION OK: Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
      GLASS POS - OPEN Glass position (3/4 open - Fully open) OK / CAUTION OK; Power window is moving UP by manual operation
      CAUTION: May be displayed even when no resistance is applied in each position. In this case, there is a foreign object stuck in that position
      		 -
  2. PERFORM ACTIVE TEST 
    CAUTION: This test causes vehicle parts to move. Please watch your hands.

    HINT:

    Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

    1. Connect the intelligent tester to the DLC3.
    2. Turn the ignition switch ON.
    3. Performing the ACTIVE TEST by following the directions on the tester screen.

      Multiplex network door ECU front LH (Driver door ECU) 

      DISPLAY CONDITION CHART

      Item Test Details Diagnostic Note
      P/W UP/DOWN Power Window UP/DOWN -

      Multiplex network door ECU front RH (Passenger door ECU) 

      ITEM CONTENT REFERENCE CHART

      Item Test Details Diagnostic Note
      P/W UP/DOWN Power Window UP/DOWN -
scientia non olet · About LEMON Manuals