Front Speed Sensor: Installation

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.
  Fig 1: Locating Bolt And Sensor

  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. INSTALL FRONT SPEED SENSOR LH 
   1. Install the sensor with the bolt.

      Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf) 

   2. Install the sensor harness with the 2 clamp bolts and resin clip.

      Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf) 

      Fig 2: Locating Bolt And Sensor

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Connect the sensor connector.
      Fig 3: Connecting Sensor Connector

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL FRONT FENDER LINER LH 
3. INSTALL FRONT WHEEL 
   1. Install the wheel with the 5 nuts.

      Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

   2. Install the ornament with the 10 bolts.

      Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf) 

4. CHECK ABS SPEED SENSOR SIGNAL 
   1. Check the ABS speed sensor signal (see TEST MODE PROCEDURE  ).