Charging Systems: Charging: Generator: Replacement

REPLACE FRONT BEARING
1. Remove the 4 screws and bearing retainer.
  
  Fig 1: Locating Bearing Retainer And Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST and a press, press out the bearing.
  SST 09223-00010
  
  Fig 2: Pressing Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using SST and a press, press in a new bearing.
  SST 09950-60010
4. Install the bearing retainer with the 4 screws.
  Torque: 2.3 N*m (24 kgf*cm, 20 in.*lbf)
  
  Fig 3: Pressing New Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REPLACE REAR BEARING
1. Using SST, remove the bearing cover (outside) and bearing.
  SST 09820-00021
  
  NOTE: Be careful not to damage the fan.
2. Remove the bearing cover (inside).
  
  Fig 4: Removing Rear Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Place the bearing cover (inside) on the rotor.
  
  Fig 5: Placing Bearing Cover (Inside) On Rotor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using SST and a press, press in a new bearing.
  SST 09820-00031
  
  Fig 6: Pressing Bearing
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. Using SST, push in the bearing cover (outside).
  SST 09285-76010
  
  Fig 7: Pushing Bearing Cover (Outside)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002