Ignition Switch: Inspection
- INSPECT IGNITION SWITCH ASSEMBLY
- Measure the resistance of the switch.
Standard resistance
RESISTANCE REFERENCETester Connection Switch Position Specified Condition - LOCK 10 kΩ or higher 2 (AM1) - 3 (ACC) ACC Below 1 Ω 2 (AM1) - 3 (ACC) 3 (ACC) - 4 (IG1) 6 (IG2) - 7 (AM2) ON Below 1 Ω 1 (ST1) - 2 (AM1) 2 (AM1) - 4 (IG1) 6 (IG2) - 7 (AM2) 7 (AM2) - 8 (ST2) START Below 1 Ω If the result is not as specified, replace the switch assembly.
- Measure the resistance of the switch.