LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Camshaft Position Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Installation

  1. INSTALL CAMSHAFT POSITION SENSOR 
    1. Install the sensor with the bolt and stud bolt.
      Fig 1: Locating Sensor With Bolt And Stud Bolt
      G05291586Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf) 

  2. INSTALL NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH (See  INSTALLATION  ) 
  3. INSTALL RADIATOR HOSE INLET 
  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  5. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  6. ADD ENGINE COOLANT (See  COOLANT  ) 
  7. CHECK FOR ENGINE COOLANT LEAKS 
    1. Check for engine coolant leaks (see COOLING SYSTEM ).
  8. INSTALL NO. 1 AIR CLEANER INLET (See  INSTALLATION  ) 
  9. INSTALL V-BANK COVER (See  INSTALLATION  ) 
scientia non olet · About LEMON Manuals