LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. DRAIN ENGINE COOLANT (See  COOLANT  ) 
  3. REMOVE NO. 1 AIR CLEANER INLET (See  REMOVAL  ) 
  4. REMOVE V-BANK COVER (See  REMOVAL  ) 
  5. REMOVE RADIATOR HOSE INLET 
  6. REMOVE NO. 3 TIMING BELT COVER SUB-ASSEMBLY LH (See  REMOVAL  ) 
  7. REMOVE CAMSHAFT POSITION SENSOR 
    1. Remove the bolt, stud bolt and sensor.
      Fig 1: Locating Stud And Sensor With Bolts
      G05291584Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals