Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 1)
1. Install a new O-ring to the oil control valve.
2. Install the oil control valve with the bolt.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
3. Connect the oil control valve connector.
  
  Fig 1: Locating Oil Control Valve Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Bank 2)
1. Install a new O-ring to the oil control valve.
2. Install the oil control valve with the bolt.
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
  
  Fig 2: Locating Oil Control Valve Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the wire harness with the 2 bolts.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
4. Connect the oil control valve connector.
INSTALL INTAKE AIR CONNECTOR PIPE
1. Connect the air hose and ventilation hose.
2. Install the bolt and intake air connector pipe with the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
3. Tighten the 2 hose clamps.
  
  Fig 3: Locating Wire Harness With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL V-BANK COVER
1. Install the cover with the 2 nuts.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.