LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Engine Performance >> Engine Control System >> VVT Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

VVT Sensor: Removal

  1. DISCHARGE FUEL SYSTEM PRESSURE 
  2. DRAIN ENGINE COOLANT (See  COOLANT  ) 
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  4. REMOVE V-BANK COVER (See  REMOVAL  ) 
  5. REMOVE NO. 1 AIR CLEANER INLET (See  REMOVAL  ) 
  6. REMOVE INTAKE AIR CONNECTOR PIPE (See  REMOVAL  ) 
  7. REMOVE INTAKE MANIFOLD 
    1. Remove the intake manifold (see REMOVAL ).
  8. REMOVE VVT SENSOR 
    1. Remove the 2 bolts and 2 sensors.
      Fig 1: Locating VVT Sensor Bolts
      G05291589Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals