Fuel Pump Resistor: Installation

INSTALL FUEL PUMP RESISTOR
1. Install the fuel pump resistor with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2. Connect the connector.
  
  Fig 1: Locating Fuel Pump Resistor With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.