Shift Lock System: Inspection

INSPECT KEY INTERLOCK SOLENOID
1. Disconnect the solenoid connector.
  
  Fig 1: Identifying Shift Lock Control ECU Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the battery's positive (+) lead to terminal 4 (KLS+) and the battery's negative (-) lead to terminal 3 (KLS-). Check that the operating noise of the solenoid can be heard.
  If the result is not as specified, replace the solenoid.
  
  Fig 2: Identifying (KLS+) And (KLS-) Connector Terminals
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002