Transmission Wire: Installation

INSTALL TRANSMISSION WIRE
1. Coat a new O-ring with ATF and install it to the transmission wire.
  
  Fig 1: Identifying Removed O-Ring From Transmission Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the transmission wire with the bolt.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
3. Connect the transmission wire connector.
  
  Fig 2: Locating Transmission Wire Connector Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT TRANSMISSION WIRE
1. Connect the 9 connectors to the solenoid valves.
  
  Fig 3: Locating Solenoid Valves Connectors
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the 2 clamps with the 2 bolts.
  Torque: 6.4 N*m (65 kgf*cm, 57 in.*lbf) for bolt A
  
  10 N*m (102 kgf*cm, 7 ft.*lbf) for bolt B
  
  Fig 4: Locating Bolts And Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the ATF temperature sensor and lock plate with the bolt.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
INSTALL VALVE BODY OIL STRAINER ASSEMBLY
1. Coat a new O-ring with ATF.
  
  Fig 5: Locating Valve Body Oil Strainer Assembly Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the O-ring.
  
  Fig 6: Identifying O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the oil strainer with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  Fig 7: Locating Oil Strainer Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY
1. Install the 3 magnets in the oil pan.
  
  Fig 8: Identifying Oil Pan Magnet
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install a new gasket and the oil pan to the transmission case with the 20 bolts.
  Torque: 4.4 N*m (45 kgf*cm, 39 in.*lbf)
  
  Fig 9: Locating Transmission Case Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY
1. Install the bracket with the 4 bolts and 2 nuts.
  
  Fig 10: Locating Exhaust Pipe Support Bracket Sub-Assembly Nut And Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 43 N*m (438 kgf*cm, 32 ft.*lbf)
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
ADD AUTOMATIC TRANSMISSION FLUID
1. Add automatic transmission fluid (see ADJUSTMENT ).
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.