Data List / Active Test

1. Connect Techstream to the DLC3.
2. Monitor the ECU data by following the prompts on the tester screen.

   HINT:

   Techstream has a "Snapshot" function which records the monitored data. Refer to Techstream operator's manual for further details.

HINT:

Using the Data List displayed on Techstream, the value of the switches, sensors, actuators, etc. can be read without part removal. Reading the Data List as the first step in troubleshooting is one way to shorten the labor time.

1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Read the Data List according to the display on the tester.

   Master SW: 

   DIAGNOSTIC NOTE
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   D P/W Auto SW	Driver door power window auto switch signal/ON or OFF	ON Driver door power window auto switch operates OFF Driver door power window auto switch does not operate
   P P/W Auto SW	Front passenger door remote power window auto switch signal/ ON or OFF	ON Front passenger door remote power window auto switch operates OFF Front passenger door remote power window auto switch does not operate
   RR P/W Auto SW	Rear RH door remote power window auto switch signal/ON or OFF	ON Rear RH door remote power window auto switch operates OFF Rear RH door remote power window auto switch does not operate
   RL P/W Auto SW	Rear LH door remote power window auto switch signal/ON or OFF	ON Rear LH door remote power window auto switch operates OFF Rear LH door remote power window auto switch does not operate
   P P/W Up SW	Front passenger door remote power window manual up switch signal/ON or OFF	ON Front passenger door remote power window manual up switch operates OFF Front passenger door remote power window manual up switch does not operate
   RR P/W Up SW	Rear RH door remote power window manual up switch signal/ ON or OFF	ON Rear RH door remote power window manual up switch operates OFF Rear RH door remote power window manual up switch does not operate
   RL P/W Up SW	Rear LH door remote power window manual up switch signal/ ON or OFF	ON Rear LH door remote power window manual up switch operates OFF Rear LH door remote power window manual up switch does not operate
   P P/W Down SW	Front passenger door remote power window manual down switch signal/ON or OFF	ON Front passenger door remote power window manual down switch operates OFF Front passenger door remote power window manual down switch does not operate
   RR P/W Down SW	Rear RH door remote power window manual down switch signal/ON or OFF	ON Rear RH door remote power window manual down switch operates OFF Rear RH door remote power window manual down switch does not operate
   RL P/W Down SW	Rear LH door remote power window manual down switch signal/ON or OFF	ON Rear LH door remote power window manual down switch operates OFF Rear LH door remote power window manual down switch does not operate

   Main Body: 

   DIAGNOSTIC NOTE
   
   

   Tester Display	Measurement Item/Range	Normal Condition
   Com Master SW	Master switch communication signal OK/STOP	OK Communication is normal STOP Communication is stopped

HINT:

Performing the Active Test using Techstream allows you to operate the relay, VSV, actuator, etc without parts removal. Performing the Active Test as the first step in troubleshooting is one way to shorten the labor time It is possible to display the Data List during the Active Test

1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG)
3. Perform the Active Test according to the display on the tester

   Main Body: 

   DIAGNOSTIC NOTE
   
   

   Tester Display	Test Part	Control Range
   IG Off P/W	Operates power window	ON/OFF (After ignition OFF)