Steering Angle Sensor: Installation

INSTALL STEERING ANGLE SENSOR
1. Align the locating pins, engage the claws, and install the steering angle sensor to the spiral cable.
  
  Fig 1: Identifying Steering Angle Sensor Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR (See INSTALLATION )
INSTALL STEERING COLUMN COVER (See INSTALLATION )
ADJUST SPIRAL CABLE (See INSTALLATION )
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
INSPECT STEERING WHEEL CENTER POINT
INSTALL STEERING PAD (See INSTALLATION )
INSTALL NO. 2 LOWER STEERING WHEEL COVER (See INSTALLATION )
INSTALL NO. 3 LOWER STEERING WHEEL COVER (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT STEERING PAD (See INSTALLATION )
INSPECT SRS WARNING LIGHT
HINT:

(See DIAGNOSIS SYSTEM )