DTC Check/Clear

CHECK DTC
1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Enter the following menus: Powertrain / E-ACM / Trouble Codes.
4. Check the DTCs on the tester screen.
  HINT:
  
  Refer to the Techstream operator's manual for further details.
CLEAR DTC
1. Connect Techstream to the DLC3.
2. Turn the engine switch on (IG).
3. Erase the DTCs by following the prompts on the tester screen.
4. Enter the following menus: Powertrain / E-ACM / Trouble Codes.
5. Erase the DTC.
  HINT:
  
  Refer to the Techstream operator's manual for further details.