Active Control Engine Mount: Installation

INSTALL ACTIVE CONTROL ENGINE MOUNT
1. Install the acceleration sensor with the 2 nuts.
  Torque: 8.0 N*m (81 kgf*cm, 71 in.*lbf)
  
  Fig 1: Locating Acceleration Sensor And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the active control engine mount with the 3 nuts.
  Torque: 52 N*m (530 kgf*cm, 38 ft.*lbf)
  
  Fig 2: Locating Active Control Engine Mount And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL ENGINE MOUNTING BRACKET FR
1. Install the engine mounting bracket FR with the 4 bolts.
  Torque: Automatic Transaxle Side
  
  64 N*m (653 kgf*cm, 47 ft.*lbf)
  
  Active Engine Mounting Side
  
  87 N*m (887 kgf*cm, 64 ft.*lbf)
  
  Fig 3: Locating Engine Mounting Bracket FR With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the earth cable with the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Fig 4: Locating Earth Cable And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the 2 connectors and clamp.
INSTALL NO. 1 AIR CLEANER INLET (See INSTALLATION )
INSTALL AIR CLEANER INLET ASSEMBLY (See INSTALLATION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER LH (See INSTALLATION )

Fig 5: Locating Connectors And Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )
INSTALL ENGINE UNDER COVER RH
INSTALL ENGINE UNDER COVER LH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).