Active Control Engine Mount: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
REMOVE ENGINE UNDER COVER LH
REMOVE ENGINE UNDER COVER RH
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER INLET ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE ENGINE MOUNTING BRACKET FR
HINT:

Securely support the automatic transaxle using a jack.
1. Disconnect the 2 connectors and clamp.
  
  Fig 1: Locating Connectors And Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt and disconnect the earth cable.
  
  Fig 2: Locating Earth Cable And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the 4 bolts and engine mounting bracket FR.
  
  Fig 3: Locating Engine Mounting Bracket FR And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE ACTIVE CONTROL ENGINE MOUNT
1. Remove the 3 nuts and active control engine mount.
  
  Fig 4: Locating Active Control Engine Mount And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 nuts and acceleration sensor.
  
  Fig 5: Locating Acceleration Sensor And Fasteners
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002