VVT Sensor: Removal

REMOVE ENGINE UNDER COVER LH
REMOVE ENGINE UNDER COVER RH
DRAIN ENGINE COOLANT (See Drain or Add coolant under ON-VEHICLE INSPECTION )
REMOVE COOL AIR INTAKE DUCT SEAL (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER LH (See REMOVAL )
REMOVE ENGINE ROOM SIDE COVER RH (See REMOVAL )
REMOVE V-BANK COVER SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER INLET ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER CAP SUB-ASSEMBLY (See REMOVAL )
REMOVE AIR CLEANER CASE SUB-ASSEMBLY (See REMOVAL )
REMOVE NO. 1 AIR CLEANER INLET (See REMOVAL )
REMOVE FRONT SUSPENSION UPPER CENTER BRACE (See REMOVAL )
REMOVE INTAKE AIR SURGE TANK ASSEMBLY (See REMOVAL )
REMOVE VVT SENSOR (for Bank 1 Intake Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 1: Locating VVT Sensor Connector And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 1 Exhaust Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 2: Locating VVT Sensor Connector And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 2 Intake Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 3: Locating VVT Sensor Connector And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE VVT SENSOR (for Bank 2 Exhaust Side)
1. Disconnect the VVT sensor connector.
2. Remove the bolt and VVT sensor.
  
  Fig 4: Locating VVT Sensor Connector And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002