ATF Temperature Sensor: Installation

INSTALL ATF TEMPERATURE SENSOR ASSEMBLY
1. Coat a new O-ring with ATF and install it to the ATF temperature sensor assembly.
2. Coat the 4 bolts with ATF.
  
  Fig 1: Locating ATF Temperature Sensor Assembly O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the ATF temperature sensor assembly and clamp to the valve body with the 4 bolts.
  Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf)
  
  Bolt length:
  
  Bolt A:
  
  25 mm (0.98 in.)
  
  Bolt B:
  
  85 mm (3.35 in.)
4. Connect the connector.
  
  Fig 2: Locating ATF Temperature Sensor Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VALVE BODY OIL STRAINER ASSEMBLY (See INSTALLATION )
INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSEMBLY (See INSTALLATION )
INSTALL AUTOMATIC TRANSAXLE ASSEMBLY
HINT:

(See INSTALLATION )