LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> Automatic Transaxle System >> DTC P0711 Transmission Fluid Temperature Sensor "A" Performance >> Typical Enabling Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Typical Enabling Conditions

ALL: 

TYPICAL ENABLING CONDITIONS

The monitor will run whenever this DTC is not present None
TFT (Transmission fluid temperature) sensor circuit Circuit is not malfunctioning
ECT (Engine coolant temperature) sensor circuit Circuit is not malfunctioning
IAT (Intake air temperature) sensor circuit Circuit is not malfunctioning
Turbine speed sensor circuit Circuit is not malfunctioning
Intermediate shaft speed sensor Circuit is not malfunctioning
Shift solenoid valve SL1 circuit Circuit is not malfunctioning
Shift solenoid valve SL2 circuit Circuit is not malfunctioning
Shift solenoid valve SL3 circuit Circuit is not malfunctioning
Shift solenoid valve SL4 circuit Circuit is not malfunctioning
Knock control sensor circuit Circuit is not malfunctioning
CAN communication system Circuit is not malfunctioning
Electronic throttle system Circuit is not malfunctioning
Time after engine start 16 mm. and 40 sec or more
ECT (Engine coolant temperature) -15°C (5°F) or more

Condition A: 

TYPICAL ENABLING CONDITIONS

Time after engine start 18 mm. and 20 sec.
Driving distance after engine start 5 miles (8 km) or more
IAT (12 sec. after engine start) Above -10°C (14°F)
ECT (12 sec after engine start) Above -10°C (14°F)
Accumulated driving time *1 200 sec. or more
*1: Following conditions are met  
Engine speed - Turbine speed 50 RPM or more
Output speed 400 RPM or more
Throttle valve opening angle 3% or more
TFT (Transmission fluid temperature) Less than 20°C (68°F)
Shift position Not "N" or "P"

Condition B: 

TYPICAL ENABLING CONDITIONS

Time after engine start 30 mm.
Driving distance after engine start 9.3 miles (15 km)
IAT (12 sec. after engine start) -15°C (5°F) or more
ECT (12 sec. after engine start) -15°C (5°F) or more
TFT (Transmission fluid temperature) Less than 20°C (68°F)
Accumulated driving time *1 400 sec. or more

Condition C: 

TYPICAL ENABLING CONDITIONS

Time after engine start 40 min.
Driving distance after engine start 12 4 miles (20 km)
TFT (Transmission fluid temperature) Less than 20°C (68°F)
Accumulated driving time *1 550 sec. or more

Condition D: 

TYPICAL ENABLING CONDITIONS

Time after ECT reaches 60°C (140°F) 10 sec. or more
TFT (12 sec. after engine start) 110°C (230°F) or more
ECT (12 sec. after engine start) Less than 35°C (95°F)