Freeze Frame Data
- FREEZE FRAME DATA
- If a DTC is detected when the ABS, BA, TR(A)C or VSC operates, the skid control ECU stores the current vehicle (sensor) state as Freeze Frame Data.
The skid control ECU stores the number of times (maximum: 31) the power switch has been turned from OFF to ON (IG) since the last time the ABS, BA, TR(A)C or VSC was activated.
HINT:
- The skid control ECU will not count the number of times the power switch is turned ON (IG) if the vehicle does not drive at the speed of at least 7 km/h (4.3 mph), or a DTC is detected.
- Freeze Frame Data at the time the ABS, BA, TR(A)C or VSC operates:
The skid control ECU stores and updates the data whenever the ABS, BA, TR(A)C or VSC system operates.
When the ECU stores data at the time a DTC is detected, the data stored when the ABS, BA, TR(A)C or VSC operated may be erased.
- Freeze Frame Data at the time a DTC is detected:
When the skid control ECU stores data at the time a DTC is detected, no updates will be performed until the data is cleared.
- Connect the Techstream to the DLC3.
- Turn the power switch ON (IG).
- From the display on the tester, select the Freeze Frame Data.
ABS / VSC / TRAC:
TESTER DISPLAY REFERENCE CHARTTester Display Measurement Item Reference Value Detailed Freeze DTC Detailed code for freeze frame DTC Min.: 0, Max.: 65535 Elapsed Time after Freeze Trigger Elapsed time after freeze trigger Min.: 0 ms, Max.: 500 ms Number of IG ON Number of operations of power switch ON (IG) after storing Freeze Frame Data 0 to 31 Elapsed Time Elapsed time after power switch ON (IG) Min.: 0 sec. Max.: 100661.76 sec. Buzzer Skid control buzzer signal Skid control buzzer ON: ON, OFF: OFF Stop Lamp SW Stop light switch signal Stop light switch ON: ON, OFF: OFF Parking Brake SW Parking brake switch signal Parking brake switch ON: ON, OFF: OFF Reservoir Warning SW Brake fluid level warning switch signal Brake fluid level warning switch ON: ON, OFF: OFF Gear Position Gear position information FAIL
1st
2nd
3rd
4th
5th
6th
P, N
R
NOT RShift Lever Position Shift lever position information FAIL
1st
2nd
3rd
4th
5th
6th/B
D/M
P, N
ROperated System Operated system status ABS activated: ABS
VSC activated: VSC
TR(A)C activated: TR(A)C
BA activated: BA
Fail-safe mode activated: FAIL
PBA activated: PBA
PB activated: PB
Hill-start assist control activated: HA-CTRL
System prohibited: SYS
No system activated: NONMaster Cylinder Sensor Master cylinder pressure sensor reading Min.: 0 V
Max.: 5 VM/C Sensor Grade Master cylinder pressure sensor change Min.: -30 MPa/s, Max.: 225 MPa/s Master Cylinder Sensor 2 Master cylinder pressure sensor reading Min.: 0 V, Max.: 5 V Stroke Sensor Stroke sensor reading Min.: 0 V, Max.: 5 V Stroke Sensor 2 Stroke sensor 2 reading Min.: 0 V, Max.: 5 V Accumulator Sensor Accumulator pressure sensor reading Min.: 0 V, Max.: 5 V Yaw Rate Sensor Yaw rate sensor reading Min.: -128 deg/s, Max.: 127 deg/s FR W/C Sensor FR wheel cylinder pressure sensor reading Min.: 0 V, Max.: 5 V FLW/C Sensor FL wheel cylinder pressure sensor reading Min.: 0 V, Max.: 5 V RR W/C Sensor RR wheel cylinder pressure sensor reading Min.: 0 V, Max.: 5 V RL W/C Sensor RL wheel cylinder pressure sensor reading Min.: 0 V, Max.: 5 V Lateral G Lateral G Min.: -25.11 m/s2 , Max.: 24.91 m/s2 Forward and Rearward G Forward and rearward G Min.: -25.11 m/s2 , Max.: 24.91 m/s2 FR Wheel Speed FR wheel speed reading Min.: 0 km/h (0 mph), Max.: 326.4 km/h (202 mph) FL Wheel Speed FL wheel speed reading Min.: 0 km/h (0 mph), Max.: 326.4 km/h (202 mph) RR Wheel Speed RR wheel speed reading Min.: 0 km/h (0 mph), Max.: 326.4 km/h (202 mph) RL Wheel Speed RL wheel speed reading Min.: 0 km/h (0 mph), Max.: 326.4 km/h (202 mph) Vehicle Speed Vehicle speed reading Min.: 0 km/h (0 mph), Max.: 326.4 km/h (202 mph) FR Wheel Direction Front right wheel direction signal Front right wheel direction FORWARD: Forward, BACK: Back FL Wheel Direction Front left wheel direction signal Front left wheel direction FORWARD: Forward, BACK: Back RR Wheel Direction Rear right wheel direction signal Rear right wheel direction FORWARD: Forward, BACK: Back RL Wheel Direction Rear left wheel direction signal Rear left wheel direction FORWARD: Forward, BACK: Back Real Engine Torque Real engine torque Min.: -1024 Nm, Max.: 1023 Nm Accelerator Opening Angle % Accelerator opening angle % Min.: 0%, Max.: 128% ECB(1) Motor Relay Electronically controlled brake system motor relay signal Electronically controlled brake system motor relay ON: ON, OFF: OFF ECB(1) Motor Relay 2 Electronically controlled brake system motor relay 2 signal Electronically controlled brake system motor relay 2 ON: ON, OFF: OFF ECB(1) Main Relay Electronically controlled brake system main relay signal Electronically controlled brake system main relay ON: ON, OFF: OFF ECB(1) Main Relay 2 Electronically controlled brake system main relay 2 signal Electronically controlled brake system main relay 2 ON: ON, OFF: OFF ECB(1) Solenoid (SMC1) Electronically controlled brake system solenoid (SMC 1) signal Electronically controlled brake system solenoid (SMC1)ON: ON, OFF: OFF ECB(1) Solenoid (SMC2) Electronically controlled brake system solenoid (SMC2) signal Electronically controlled brake system solenoid (SMC2) ON: ON, OFF: OFF ECB(1) Solenoid (SCSS) Electronically controlled brake system solenoid (SCSS) signal Electronically controlled brake system solenoid (SCSS) ON: ON, OFF: OFF Capacitor Mode Capacitor mode Capacitor mode ON: ON, OFF: OFF IG1 Voltage Value IG1 voltage value Min.: 0 V, Max.: 20 V IG2 Voltage Value IG2 voltage value Min.: 0 V, Max.: 20 V BS1 Voltage Value BS1 voltage value Min.: 0 V, Max.: 20 V BS2 Voltage Value BS2 voltage value Min.: 0 V, Max.: 20 V VM1 Voltage Value VM1 voltage value Min.: 0 V, Max.: 20 V VM2 Voltage Value VM2 voltage value Min.: 0 V, Max.: 20 V +B1 Voltage Value +B1 voltage value Min.: 0 V, Max.: 20 V +B2 Voltage Value +B2 voltage value Min.: 0 V, Max.: 20 V Motor Relay Voltage Value Motor relay voltage value Min.: 0 V, Max.: 20 V SLAFR Solenoid Current SLAFR solenoid current Min.: 0 A, Max.: 1.5 A SLAFL Solenoid Current SLAFL solenoid current Min.: 0 A, Max.: 1.5 A SLARR Solenoid Current SLARR solenoid current Min.: 0 A, Max.: 1.5 A SLARL Solenoid Current SLARL solenoid current Min.: 0 A, Max.: 1.5 A SLRFR Solenoid Current SLRFR solenoid current Min.: 0 A, Max.: 1.5 A SLRFL Solenoid Current SLRFL solenoid current Min.: 0 A, Max.: 1.5 A SLRRR Solenoid Current SLRRR solenoid current Min.: 0 A, Max.: 1.5 A SLRRL Solenoid Current SLRRL solenoid current Min.: 0 A, Max.: 1.5 A FR Target Oil Pressure FR wheel target oil pressure reading Min.: 0 MPa, Max.: 20 MPa FL Target Oil Pressure FL wheel target oil pressure reading Min.: 0 MPa, Max.: 20 MPa RR Target Oil Pressure RR wheel target oil pressure reading Min.: 0 MPa, Max.: 20 MPa RL Target Oil Pressure RL wheel target oil pressure reading Min.: 0 MPa, Max.: 20 MPa Steeling Angle Sensor Steering angle sensor reading Min.: -1152 deg
Max.: 1143 degTRC/VSC Off Mode TR(A)C/VSC off mode NORMAL: Normal mode
TRC OFF: TR(A)C off mode
VSC OFF: VSC off mode(1) Electronically Controlled Brake
- If a DTC is detected when the ABS, BA, TR(A)C or VSC operates, the skid control ECU stores the current vehicle (sensor) state as Freeze Frame Data.