Torque Specifications
2GR-FSE ENGINE CONTROL SYSTEM - TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Intake air surge tank x Intake manifold | for nut | 16 | 163 | 12 |
| for bolt | 18 | 184 | 13 | |
| Surge tank stay x Intake air surge tank | 21 | 214 | 15 | |
| Water hose joint x Intake air surge tank | 10 | 102 | 7 | |
| Purge VSV x Intake air surge tank | 18 | 184 | 13 | |
| Water hose joint x Cylinder head | 10 | 102 | 7 | |
| Intake manifold x Cylinder head | 21 | 214 | 15 | |
| Throttle body assembly x Intake air surge tank | 10 | 102 | 7 | |
| Knock sensor x Cylinder block sub-assembly | 20 | 204 | 15 | |
| WT sensor x Cylinder head cover | 10 | 102 | 7 | |
| Intake manifold x Cylinder head sub-assembly | 21 | 214 | 15 | |
| Cylinder head cover sub-assembly x Camshaft timing oil control valve | 10 | 102 | 7 | |
| Air cleaner hose x Throttle body : for hose clamp | 4.0 | 41 | 35 in.*lbf | |
| V-bank cover bracket x Cylinder head cover | 10 | 102 | 7 | |
| Crankshaft position sensor x Cylinder block | 10 | 102 | 7 | |
| No. 1 air cleaner inlet x Body | 5.0 | 51 | 44 in.*lbf | |
| Cooler compressor assembly x V-ribbed belt tensioner assembly | 24.5 | 250 | 18 | |
| Cooler compressor assembly x Discharge hose sub-assembly | 9.8 | 100 | 7 | |
| Cooler compressor assembly x No. 1 cooler refrigerant suction hose | 9.8 | 100 | 7 | |
| Radiator upper bracket x Body | 5.0 | 51 | 44 in.*lbf | |
| ECM upper bracket x Hybrid vehicle control ECU | 3.0 | 30 | 27 in.*lbf | |
| ECM upper bracket x ECU | 3.0 | 30 | 27 in.*lbf | |
| ECM lower bracket x Hybrid vehicle control ECU | 3.0 | 30 | 27 in.*lbf | |
| ECM lower bracket x ECM | 3.0 | 30 | 27 in.*lbf | |
| ECM upper bracket x Engine room No. 1 relay block | 5.5 | 56 | 49 in.*lbf | |
| ECM lower bracket x Body | 5.5 | 56 | 49 in.*lbf | |