Steering Angle Sensor: Installation

INSTALL STEERING SENSOR
1. Align the locating pins, engage the claws and install the steering sensor to the spiral cable sub-assembly
INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING SENSOR (See INSTALLATION )
INSTALL STEERING COLUMN COVER
for 2GR-FSE (See INSTALLATION )

for 1UR-FSE (See INSTALLATION )

Fig 1: Identifying Steering Sensor Locating Pins
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CENTER SPIRAL CABLE (See INSTALLATION )
INSTALL STEERING WHEEL ASSEMBLY
for 2GR-FSE (See INSTALLATION )

for 1UR-FSE (See INSTALLATION )
INSTALL HORN BUTTON ASSEMBLY (See INSTALLATION )
INSPECT STEERING WHEEL CENTER POINT
CONNECT BATTERY NEGATIVE TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
INSPECT HORN BUTTON ASSEMBLY (See DISPOSAL )
INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )