Front Speed Sensor: Installation

INSTALL SPEED SENSOR FRONT LH
1. Using a hexagon wrench (5 mm), install the front speed sensor with the bolt to the steering knuckle.
  Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)
  
  NOTE: Make sure the sensor tip is clean.
  
  Fig 1: Locating Bolt And Front Speed Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the speed sensor connector
INSTALL FRONT WHEEL
Torque: 112 N*m (1137 kgf*cm, 82 ft.*lbf)
CHECK SPEED SENSOR SIGNAL
HINT:

(See TEST MODE PROCEDURE )

Fig 2: Locating Speed Sensor Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002