Camshaft Position Sensor: Installation

INSTALL CAMSHAFT POSITION SENSOR
1. Install the camshaft position sensor with the bolt and stud bolt.
  Torque: 7.5 N*m (80 kgf*cm, 66 in.*lbf)
2. Reconnect the camshaft position sensor connector.
  
  Fig 1: Locating Camshaft Position Sensor Bolt And Stud Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL TIMING BELT COVER SUB-ASSEMBLY NO. 3 LH (See INSTALLATION )
INSTALL OIL COOLER PIPE (See INSTALLATION )
INSTALL FAN AND GENERATOR V BELT (See INSTALLATION )
ADD ENGINE COOLANT (See REPLACEMENT )
CHECK FOR ENGINE COOLANT LEAKS (See ON-VEHICLE INSPECTION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )