LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS >> Power Window Control System >> Operation Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Check

  1. CHECK WINDOW LOCK SWITCH 
    1. Check that the front passenger side power window and rear power windows operation are disabled when the window lock switch of the power window master switch is pressed.

      standard: 

      Front passenger side power window and rear power windows operation are disabled. 

      Fig 1: Identifying Window Lock Switch
      G04967105Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Check that the front passenger side power window and rear power windows can be operated when the window lock switch is pressed again.

      standard: 

      Front passenger side power window and rear power windows can be operated. 

  2. CHECK MANUAL UP/DOWN FUNCTION 
    1. Check that the driver side power window operates as follows:

      Standard 

      POWER WINDOW OPERATION CHART

      Condition Master Switch Switch Operation Power Window
      Engine switch on (IG) Driver side Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
    2. Check that the power windows except the driver side power window operates as follows:

      Standard 

      POWER WINDOW OPERATION CHART

      Condition Master Switch Switch Operation Power Window
      • Engine switch on (IG)
      • Window lock switch OFF
      		 Passenger side Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
      Rear LH Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
      Rear RH Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
  3. CHECK AUTO UP/DOWN FUNCTION 
    1. Check that the driver side power window operates as follows:

      Standard 

      POWER WINDOW OPERATION CHART

      Condition Master Switch Switch Operation Power Window
      Engine switch on (IG) Driver side Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
    2. Check that the power windows except the driver side power window operate as follows:

      Standard 

      POWER WINDOW OPERATION CHART

      Condition Master Switch Switch Operation Power Window
      • Engine switch on (IG)
      • Window lock switch OFF
      		 Passenger side Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
      Rear LH Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
      Rear RH Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
  4. CHECK REMOTE MANUAL UP/DOWN FUNCTION 
    1. Check that the power windows except the driver side power window operate as follows:

      Standard 

      POWER WINDOW OPERATION CHART

      Condition Master Switch Switch Operation Power Window
      • Engine switch on (IG)
      • Window lock switch OFF
      		 Passenger side Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
      Rear LH Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
      Rear RH Pulled halfway up UP (Closed)
      Pushed halfway down DOWN (Open)
  5. CHECK REMOTE AUTO UP/DOWN FUNCTION 
    1. Check that the power windows except the driver side power window operate as follows:

      Standard 

      POWER WINDOW OPERATION CHART

      Condition Master Switch Switch Operation Power Window
      • Engine switch on (IG)
      • Window lock switch OFF
      		 Passenger side Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
      Rear LH Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
      Rear RH Pulled full up UP (Closed)
      Pushed full down DOWN (Open)
  6. CHECK JAM PROTECTION FUNCTION 

    HINT:

    The jam protection function prevents any part of your body from getting caught by accident between the door frame and the door glass during power window operation.

    NOTE: If the power window motor has been reset, raise and lower the door glass several times using MANUAL function before performing the check.
    Fig 2: Checking Power Window Jam Protection Function
    G04967106Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Check that the door glass goes down by approx. 50 mm (1.97 in.) right when something gets caught between the door frame and door glass during power window operation. However, when the opening between the door frame and the door glass is less than 200 mm (7.87 in.), the door glass continues to go down and does not stop until an opening of 200 mm (7.87 in.) is achieved. Operative conditions:
      • AUTO UP
      • AUTO UP function after the engine switch is turned off
      • MANUAL UP function after the engine switch turned off
scientia non olet · About LEMON Manuals