LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Installation

  1. INSTALL STEERING ANGLE SENSOR 
    1. Align the locating pins, engage the 6 claws and install the steering angle sensor to the spiral cable sub-assembly.
      2. Fig 1: Identifying Steering Angle Sensor Claws
      G05319598Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR  (See INSTALLATION )
  3. INSTALL STEERING COLUMN COVER  (See INSTALLATION )
  4. INSTALL STEERING WHEEL ASSEMBLY  (See INSTALLATION )
  5. INSTALL STEERING PAD  (See INSTALLATION )
  6. INSTALL NO. 3 LOWER STEERING WHEEL COVER  (See INSTALLATION )
  7. INSTALL NO. 2 LOWER STEERING WHEEL COVER  (See INSTALLATION )
  8. INSPECT STEERING WHEEL CENTER POINT 
    1. Inspect the steering wheel center point.
  9. CONNECT BATTERY NEGATIVE TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. (See INITIALIZATION )
  10. INSPECT STEERING PAD  (See INSTALLATION )
  11. INSPECT SRS WARNING LIGHT 

    HINT:

    (See DIAGNOSIS SYSTEM )

scientia non olet · About LEMON Manuals