LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 350 >> Repair and Diagnosis >> General Information >> Identification >> Introduction >> Repair Instruction >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

HINT:

The following items can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

    Tilt & Telescopic 

    DEFAULT CHART

    DISPLAY DEFAULT CONTENTS SETTING
    Autoaway/Return function ON ON/OFF of the auto away / return function ON/OFF
  2. AIR CONDITIONING SYSTEM 

    Air Conditioner 

    DEFAULT CHART

    Tester Display Default Contents Setting
    Set Temperature Shift NORMAL To control with the shifted temperature against the display temperature +2C/+1 C/NORMAL /-1 C /-2 C
    Air Inlet Mode AUTO In case of turning the A/C ON when you desire to make the compartment cool down quickly, this is the function to change the mode automatically to RECIRCULATION mode MANUAL/AUTO
    Compressor Mode AUTO Function to turn the A/C ON automatically by pressing the AUTO button when the blower is ON and the A/C is OFF MANUAL/AUTO
    Compressor/Air Inlet DEF operation LINK Function to turn the A/C ON automatically linked with the FRONT DEF button when A/C OFF NORMAL/LINK
    Evaporator Control AUTO Function to set the evaporator control to the AUTOMATIC position (AUTO) to save power, or to the coldest position (MANUAL) to dehumidify the air and to prevent the windows from fogging up MANUAL/AUTO
    Emission Gas Sensor Shift* NORMAL Function to change the sensitivity of the exhaust gas sensor MU MORE / MORE / LI MORE / NORMAL 1 LI LESS / LESS / MU LESS
    Button Press Buzzer ON Function to sound a buzzer when button is pressed OFF / ON
    Foot/DEF Auto Mode ON Function to turn the airflow from FOOT / DEF ON automatically when AUTO MODE is ON OFF/ON
    Foot/DEF Automatic Blow Up Function ON Function to change the blower level automatically when the defroster is ON OFF/ON
    Ambient Temperature Shift NORMAL Function to control the shifted ambient temperature in relation to the displayed ambient temperature +3 C / +2 C / +1 C / NORMAL / -1 C / -2 C / -3 C
    Foot Air Leak ON Function to cut off the airstream felt underfoot while the vehicle is moving OFF/ON
  3. THEFT DETERRENT SYSTEM 

    Security 

    DEFAULT CHART

    Display (Item) Default Contents Setting
    Passive Mode OFF PASSIVE MODE is a function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not in the actuation area and driver side door is closed, even if doors are not locked by wireless or door key lock operation
    In PASSIVE MODE, if you do not perform following operations within 14 seconds after door is opened during armed state, theft deterrent system will judge that condition as a theft and switch to alarm sounding state
    • Unlock any door by key or wireless operation
    • Reconnect battery
    • Turn the engine switch on (IG)
    		 ON/OFF
    Warning by Horn ON Function that makes vehicle horn and theft deterrent horn be able to be used as a warning device ON/OFF
    Entry Delay Time 14s Function that changes entry delay time (time before warning starts) for PASSIVE MODE 0 s/14 s/30 s
  4. LIGHTING SYSTEM 

    Illuminated Entry: 

    DEFAULT CHART

    Display Default Contents Setting
    I/L when ACC OFF ON Lights up the seat illumination when the engine switch is turned off. ON / OFF
    Light Control ON Dims (ON setting) or turns off (OFF setting) the footwell lights under the following conditions:
    A/T models: engine switch on (IG), shift lever not in P, and all doors closed. M/T models: engine switch on (IG), parking lever released, and all doors closed, or engine switch on (IG), vehicle speed above 5 km/h (3 mph), and all doors closed.    		 ON / OFF
    Illumination System ON Lights up the footwell lights when one of the following occurs: the engine switch is turned on (IG), or any door is unlocked or opened. ON / OFF
    Lighting Time 15s Changes the lighting time of the seat illumination. 7.5 s/15 s/30 s
    I/L ON W/Unlock ON Lights up the seat illumination when the doors are unlocked with the transmitter. ON / OFF
    Shift Light Control AVAIL Lights up the shift illumination when the engine switch is turned on (ACC or IG). NOT AVL / AVAIL
    Exterior Foot Light Control AVAIL Lights up the door mirror foot lights when either of the following occurs: the doors are unlocked with the transmitter, or the key enters any actuation area around the doors. NOT AVL / AVAIL
    Exterior Foot Light Lighting Time 15s Changes the lighting time of the door mirror foot lights. 15 s/7.5 s/30 s

    Light Control: 

    DEFAULT CHART

    Display Default Contents Setting
    Light Auto OFF Delay 30s Keeps the headlights on for a certain period of time after turning the engine switch off and closing all the doors with the headlights on. OFF / 30 s / 60 s / 90 s
    Sensitivity NORMAL Adjusts the sensitivity of the automatic light control system. LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
    Disp Ex OFF Sen NORMAL Changes the ambient brightness level to brighten the dimmed lights such as the indicator lights of the combination meter, A/C indicator light, and clock LIGHT2 / LIGHT1 / NORMAL / DARK1/DARK2
    Disp Ex ON Sen NORMAL Changes the ambient brightness level to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock. LIGHT2 / LIGHT1 / NORMAL / DARK1 /DARK2
    DRL Function ON ON / OFF of the DRL function ON / OFF

    HINT:

    Sensitivity adjustment can hardly be confirmed. Check by driving the customer's vehicle.

  5. WIPER AND WASHER SYSTEM 

    WIPER: 

    DEFAULT CHART

    Display Default Contents Setting
    Auto Wiper Available Function to change to the intermittent operation when the vehicle comes to a stop from driving condition with the wiper switch in the LO position Not Available / Available.
    Auto Wiper Available Function to operate the wiper automatically when it is raining Not Available / Available.
    Re - wiper Control Speed Mode Function to change the time between end of wiper motor operation and start of wiper operation to prevent streaking from washer fluid Speed Mode / 3 sec. / OFF
  6. POWER DOOR LOCK CONTROL SYSTEM 

    Door Lock 

    DEFAULT CHART

    Tester Display Default Contents Setting
    Auto Lock A/T: OFF
    M/T: ON    		 Function that locks doors when vehicle speed reaches 20 km/h (13 mph) ON/OFF
    Unlk/Key Twice (Unlock w/ 2 times D key operation) ON
    • Function that unlocks only the driver side door when the driver side door key cylinder is turned to unlock once and unlocks all the doors when it is turned to unlock twice
    • In the OFF setting, turning it once unlocks all doors
    		 ON/OFF
    All Unlk/Opn-CI (All unlock w/D door open-close) A/T: OFF
    M/T/: ON    		 Function that unlocks all other doors when opening driver side door within 10 seconds after turning the engine switch off from on (IG) ON/OFF
    Unlock/Park (Unlock w/ engine switch on (IG), shift P, speed 0 km/h (0 mph)) A/T: ON
    M/T : OFF (Cannot be changed)    		 Function that unlocks doors when the shift lever is moved to the P position from any other position while the engine switch is on (IG) ON/OFF
    Auto Lock/Shift (Auto lock/shift not P) A/T: ON
    M/T : OFF (Cannot be changed)    		 Function that locks doors when the shift lever is moved from the P position to any other position ON/OFF
  7. WIRELESS DOOR LOCK CONTROL SYSTEM 

    Wireless Door Lock Control System 

    DEFAULT CHART

    Item (Display) Default Contents Setting
    Open Door Warning ON If a door is not completely closed and LOCK is pressed, this function sounds a buzzer for 10 seconds. ON / OFF
    Wireless Control (Wireless door lock control function) ON This function turns the wireless door lock function on or off. ON / OFF
    Panic Function ON This function operates the theft deterrent system when PANIC is pressed and held for 0.8 seconds. ON / OFF
    Unlock 2 Operation (Wireless unlock operated twice) ON This function unlocks the driver side door when UNLOCK is pressed once, and unlocks all doors when pressed twice. If set to OFF, pressing UNLOCK once unlocks all doors. ON / OFF
    Trunk Lid Operation (Wireless luggage compartment door open function setting) 0.8 PR This function changes operation method of transmitter to open luggage compartment door.
    1. TIME: Push 1 time
    2. TIMES: Push 2 times (within 3 seconds)

    0.8 PR: Push longer than 0.8 seconds OFF: Does not operate    		 1 TIME/2 TIMES/0.8 PR /OFF
    Auto Lock Time 60s This function controls the amount of time from unlocking doors to automatic re-locking. 30 s/60 s/120 s
    Hazard Answer Back (Hazard answer-back for wireless door lock operation) ON When LOCK is pressed, all hazard warning lights flash once.
    When UNLOCK is pressed, all hazard warning lights flash twice.    		 ON / OFF
    Wireless Buzzer Resp (Buzzer answer-back of Wireless) ON This function makes the wireless door lock buzzer sound for answer-back when LOCK/UNLOCK is pressed. ON / OFF
  8. SMART ACCESS SYSTEM WITH PUSH-BUTTON START (FOR DOOR LOCK) 

    Smart (Smart Access System with Push-button Start) 

    DEFAULT CHART

    Tester Display Default Contents Setting
    Ignition Available Area ALL Function that switches the entry ignition detection area FRONT / ALL
    Park Wait Time (Waiting time to permit opening door after locking) 3.0s Function that sets waiting time to permit opening door after door is locked with entry lock function 1.0s/2.0s/3.0s/5.5s
    Trunk Open Mode (Luggage compartment door open mode when vehicle is locked) ON Function to permit opening luggage compartment door ON / OFF
    Key Low Battery Warning (Warning when key battery becomes weak) ON Function that warns driver that key's battery power Is low ON / OFF
  9. METER / GAUGE SYSTEM 

    Combination Meter: 

    DEFAULT CHART

    Tester Display Default Contents Setting
    Key Remind Volume Large Function to change the volume of the key remind warning buzzer Large, Medium, SmallL
    Key Remind Sound Normal Function to change the cycle of the key remind warning buzzer Fast, Normal, Slow
    Units By Region MUG(*1)
    KM/L (*2)    		 Function to change the unit of the trip information display ML/G, MUG, KM/L

    HINT:

    The following items can be customized without using the Techstream.

    DEFAULT CHART

    Item Default Contents Setting
    Seat belt warning buzzer (See procedure "A") b-on Function to change volume of key remind warning buzzer b-on, b-oFF
    Speed indicator (See procedure "B") 75 (mph) ((1))
    120 (km/h) ((2))    		 Function to change the value that decides the speed indicator when to illuminate 30 to 100 (mph) ((1)), 50 to 160 (km/h) ((2))
    Tach indicator (See procedure "B") 5,000 (rpm) Function to change the value that decides the tach indicator when to illuminate 2,000 to 6,500 (rpm)
    (1) U.S.A.
    (2) for Canada
  10. INTUITIVE PARKING ASSIST SYSTEM 

    Warning 

    DEFAULT CHART

    Tester Display Default Contents Setting
    Rear Buzzer Onset Range Wide Function to set rear buzzer activation range / NARROW or WIDE NARROW: 600 mm(23.62 in.)
    WIDE: 1,500 mm (59.06 in.)
    Keep Sense Status Buzzer ON Function to make buzzer sound when distance between vehicle and obstacle does not change for more than 3 seconds ON / OFF
    Fr & Rr Buzzer Volume M2 Function to change volume of buzzer/ L, M1, M2, M3 or H L: Low volume
    M1: medium low volume
    M2: medium volume
    M3: medium high volume
    H: High volume

    Sensor 

    DEFAULT CHART

    Tester Display (ITEM) Default Contents Setting
    Non P/R Range Sensor F Function to set available sensors when shift position is not in P or R / F, Rcrn2 or F F, Rcrn2: Corner sensors are available
    F: front sensors are available
  11. POWER WINDOW CONTROL SYSTEM 

    Power Window 

    DEFAULT CHART

    Tester Display DEFAULT CONTENTS CONTENTS SETTING
    Up/Door Key (Door key linked P/W UP) AVIL Function that enables all power windows to move up manually, via manual operation, when driver side door key cylinder is held in lock position for 1.5 seconds when engine switch is off. NOT/AVAIL
    Down/Door Key (Door key linked P/W DOWN) AVIL Function that enables all power windows to move down manually, via manual operation, when driver side door key cylinder is held in unlock position for 1.5 seconds when engine switch is off. NOT/AVAIL
    Down/Wireless (P/W DOWN w/ transmitter) AVIL Function that enables all power windows to move down manually, via manual operation, when unlock switch on transmitter is held for 1.5 seconds when engine switch is off. NOT/AVAIL
  12. REAR SUNSHADE SYSTEM 

    Others 

    DEFAULT CHART

    Tester Display Default Contents Selection
    R Output Time 0.7 sec. Function to change the time until operating the function linked shift R 0/0.7/0.9/1.2
    R-Shade Reverse AVAIL NOT AVL/AVAIL of the rear sunshade reverse function. NOT AVL/AVAIL
  13. SLIDING ROOF SYSTEM 

    Slide Roof 

    DEFAULT CHART

    Tester Display Default Contents Setting
    Door Key Related Open ON Function to manually open sliding roof linked with power window if holding driver side door key for 2.5 seconds or more to unlock position when engine switch is off ON/OFF
    Door Key Related Close ON Function to manually close sliding roof linked with power window if holding driver side door key for 2.5 seconds or more to lock position when engine switch is off ON/OFF
    Wireless Key Related Open ON Function to manually open sliding roof linked with power window if pressing transmitter UNLOCK switch for 3.4 seconds or more when engine switch is off ON/OFF
    Door Key Related Operation SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window Activate by holding driver side door key for 2.5 seconds or more to unlock position when engine switch is off TILT/SLIDE
    Wireless Key Related Operation SLIDE Function to select tilt up or slide open of manual sliding roof operation linked with power window Activate by pressing on transmitter UNLOCK switch for 3.4 seconds or more when engine switch is off TILT/SLIDE
scientia non olet · About LEMON Manuals