Pattern Select Switch: Inspection
- INSPECT PATTERN SELECT SWITCH
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTSwitch Condition Tester Connection Specified Condition Pattern select switch (PWR) 3 - 7 Below 1 Ω Pattern select switch (NORM) 3 - 7 10 kΩ or higher Press continuously Pattern select switch (SNOW) 1 - 3 Below 1 Ω Release Pattern select switch (SNOW) 1 - 3 10 kΩ or higher Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
If the resistance value is not as specified, replace the pattern select switch.
- Measure the resistance according to the value(s) in the table below.