Data List / Active Test

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time

1. Connect the Techstream to the DLC3
2. Turn the engine switch on (IG)
3. Turn the Techstream on
4. Enter the following menus. Body Electrical / Master Switch or Body / Data List
5. Read the Data List according to the display on the Techstream

   Master Switch (Multiplex Network Master Switch Assembly) 

   DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   Door P/W Auto SW	Driver side door power window auto switch signal/ON or OFF	ON Driver side door power window auto switch is operated OFF Driver side door power window auto switch is not operated	-
   P Door P/W Auto SW	Front passenger side door remote power window auto switch signal/ ON or OFF	ON Front passenger side door remote power window auto switch is operated OFF Front passenger side door remote power window auto switch is not operated	-
   Rr Door P/W Auto SW	Rear RH door remote power window auto switch signal/ON or OFF	ON Rear RH door remote power window auto switch is operated OFF Rear RH door remote power window auto switch is not operated	-
   Rl Door P/W Auto SW	Rear LH door remote power window auto switch signal/ON or OFF	ON Rear LH door remote power window auto switch is operated OFF Rear LH door remote power window auto switch is not operated	-
   Door P/W Up SW	Driver side door power window manual up switch signal/ON or OFF	ON Driver side door power window manual up switch is operated OFF Driver side door power window manual up switch is not operated	-
   P Door P/W Up SW	Front passenger side door remote power window manual up switch signal/ON or OFF	ON Front passenger side door remote power window manual up switch is operated OFF Front passenger side door remote power window manual up switch is not operated	-
   Rr Door P/W Up SW	Rear RH door remote power window manual up switch signal/ ON or OFF	ON Rear RH door remote power window manual up switch is operated OFF Rear RH door remote power window manual up switch is not operated	-
   Rl Door P/W Up SW	Rear LH door remote power window manual up switch signal/ ON or OFF	ON Rear LH door remote power window manual up switch is operated OFF Rear LH door remote power window manual up switch is not operated	-
   Door P/W Down SW	Driver side door power window manual down switch signal/ON or OFF	ON Driver side door power window manual down switch is operated OFF Driver side door power window manual down switch is not operated	-
   P Door P/W Down SW	Front passenger side door remote power window manual down switch signal/ON or OFF	ON Front passenger side door remote power window manual down switch is operated OFF Front passenger side door remote power window manual down switch is not operated	-
   Rr Door P/W Down SW	Rear RH door remote power window manual down switch signal/ON or OFF	ON Rear RH door remote power window manual down switch is operated OFF Rear RH door remote power window manual down switch is not operated	-
   Rl Door P/W Down SW	Rear LH door remote power window manual down switch signal/ON or OFF	ON Rear LH door remote power window manual down switch is operated OFF Rear LH door remote power window manual down switch is not operated	-
   Power Window Lock SW	Power window lock switch signal/ ON or OFF	ON Power window lock switch is in LOCK position OFF Power window lock switch is in UNLOCK position	-
   Glass Position (Close-1/4)	Door glass position (Fully closed - 1/4 open) signal/OK or CAUTION	OK Power window is going UP by manual operation CAUTION: CAUTION may be displayed when resistance is applied within either position In this case, there may be a foreign object stuck in that position	-
   Glass Position (1/4-2/4)	Door glass position (1/4 open - 2/4 open) signal/OK or CAUTION	OK Power window is going UP by manual operation CAUTION: CAUTION may be displayed when resistance is applied within either position In this case, there may be a foreign object stuck in that position	-
   Glass Position (2/4-3/4)	Door glass position (2/4 open - 3/4 open) signal/OK or CAUTION	OK Power window is going UP by manual operation CAUTION: CAUTION may be displayed when resistance is applied within either position In this case, there may be a foreign object stuck in that position	-
   Glass Position (3/4-Open)	Door glass position (3/4 open - Fully open) signal/OK or CAUTION	OK Power window is going UP by manual operation CAUTION: CAUTION may be displayed when resistance is applied within either position In this case, there may be a foreign object stuck in that position	-
   Door key Linked P/W Up	Door key linked power window up/ON or OFF	Customization status displayed	-
   Door key Linked P/W Down	Door key linked power window down/ON or OFF	Customization status displayed	-
   P/W Down W/Transmitter	Wireless transmitter linked power window down/ON or OFF	Customization status displayed	-

   Body (Main Body ECU RH (Cowl Side Junction Block RH)) 

   DATA LIST
   
   

   Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
   D Door Courtesy SW	Driver side door courtesy light switch signal/ON or OFF	ON Driver side door open OFF Driver side door closed	-
   P Door Courtesy SW	Front passenger side door courtesy light switch signal/ON or OFF	ON Front passenger side door open OFF Front passenger side door closed	-
   Rear Door Courtesy SW	Rear door courtesy light switch LH and RH signal/ON or OFF	ON Rear door open OFF Rear door closed	-

HINT

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

1. Connect the Techstream to the DLC3
2. Turn the engine switch on (IG)
3. Turn the Techstream on
4. Enter the following menus: Body Electrical / Master Switch / Active Test.
5. Perform the Active Test according to the display on the Techstream.

   Master Switch (Multiplex Network Master Switch Assembly) 

   ACTIVE TEST
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Driver Side Power Window	Driver side power window	UP/DOWN	-