Data List / Active Test

HINT.

Performing the Techstream's Active Test allows a relay, VSV, actuator and other items to be operated without removing any parts Performing the Active Test early in troubleshooting is one way to save time The Data List can be displayed during the Active Test

1. Connect the Techstream to the DLC3.
2. Turn the engine switch on (IG)
3. Turn the Techstream on
4. Enter the following menus: Body Electrical / Air Conditioner / Active Test
5. Check the value(s) by referring to the table below

   Air Conditioner 

   ACTIVE TEST
   
   

   Tester Display	Test Part	Control Range	Diagnostic Note
   Defogger Rly-R	Turns rear window defogger	OFF/ON	-