Skid Control Buzzer: Inspection

INSPECT SKID CONTROL BUZZER
1. Apply battery negative voltage to terminal 1, and battery positive voltage to terminal 2 of the skid control buzzer, and check that the buzzer sounds.
  OK: Skid control buzzer sounds.
  
  Fig 1: Identifying Clip Of Skid Control Buzzer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  HINT
  
  If the result is not as specified, replace the skid control buzzer
  
  Fig 2: Inspecting Skid Control Buzzer
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002