LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Electrical >> Starter >> Starting >> Engine Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Switch: Installation

  1. INSTALL ENGINE SWITCH 
    1. Attach the 2 claws to install the switch.
    2. Connect the switch connector
    Fig 1: Installing Engine Switch
    G05750554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See INSTALLATION )
  3. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See INSTALLATION )
  4. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See INSTALLATION )
  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See INSTALLATION )
  6. INSTALL CONSOLE BOX  (See INSTALLATION )
  7. INSTALL CONSOLE BOX REGISTER ASSEMBLY  (See INSTALLATION )
  8. INSTALL REAR ASH RECEPTACLE ASSEMBLY  (See INSTALLATION )
  9. INSTALL FRONT ASH RECEPTACLE ASSEMBLY  (See INSTALLATION )
  10. INSTALL CONSOLE PANEL SUB-ASSEMBLY  (See INSTALLATION )
  11. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH  (See INSTALLATION )
  12. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH  (See INSTALLATION )
  13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
  14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
scientia non olet · About LEMON Manuals