LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Electrical >> Starter >> Starting >> Engine Switch >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See INITIALIZATION ).
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  3. REMOVE UPPER NO. 1 CONSOLE PANEL GARNISH  (See REMOVAL )
  4. REMOVE UPPER NO. 2 CONSOLE PANEL GARNISH  (See REMOVAL )
  5. REMOVE CONSOLE PANEL SUB-ASSEMBLY  (See REMOVAL )
  6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  7. REMOVE REAR ASH RECEPTACLE ASSEMBLY  (See REMOVAL )
  8. REMOVE CONSOLE BOX REGISTER ASSEMBLY  (See REMOVAL )
  9. REMOVE CONSOLE BOX  (See REMOVAL )
  10. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  11. REMOVE CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL  (See REMOVAL )
  12. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (w/ Navigation System)  (See REMOVAL )
  13. REMOVE INTEGRATION CONTROL PANEL WITH RADIO RECEIVER ASSEMBLY (w/o Navigation System)  (See REMOVAL )
  14. REMOVE ENGINE SWITCH 
    1. Disconnect the switch connector.
    2. Detach the 2 claws and remove the switch.
    Fig 1: Removing Engine Switch
    G05750551Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals