LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Specifications >> 2UR-GSE Engine Control System >> Service Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Service Data

2UR-GSE ENGINE CONTROL - SERVICE DATA

Spark plug Standard insulation resistance 10 MΩ or more
Recommended spark plug FK20HBR11 (DENSO made)
Maximum electrode gap 1.4 mm (0.0551 in)
for used spark plug
Electrode gap 1.0 to 1.1mm (0.0394 to 0.0433 in)
for new spark plug
Camshaft timing oil control valve assembly Resistance
6 9 to 7 9 Ω at 20°C (68°F)
Throttle body 1 (M-) - 2 (M+) Resistance
0.3 to 100 Ω at 20°C(68°F)
Mass air flow meter 1 (THA) - 2 (E2) Resistance
13.6 to 18 4Ω at 20°C(68°F)
Resistance
2.21 to 2.69 Ω at 20°C (68°F)
Resistance
0.49 to 0.67 Ω at 20°C (68°F)
Engine coolant temperature sensor 1-2 Resistance
2.32 k to 2.59 kΩ at 20°C (68°F)
Resistance
0.310 k to 0.326 kΩ at 80°C (176°F)
Knock sensor 1-2 Resistance
120 to 280 kΩ at 20°C (68°F)
Air fuel ratio sensor (for sensor 1) 1 (HT) - 2 (+B) 1.8 to 3 4 Ω at 20°C (68°F)
Heated oxygen sensor (for sensor 2) 1 (HT) - 2 (+B) 11 to 16 Ω at 20°C(68°F)
EFI MAIN relay Integration relay 2C-1 - 2A-8 10 kΩ or higher
2C-1 - 2A-8 Below 1 Ω
(when battery voltage is applied to terminals 2A-6 and 2A-7)
EFI No. 2 relay Integration relay 2C-1 - 2B-4 10 kΩ or higher
2C-1 - 2B-4 Below 1 Ω
(when battery voltage is applied to terminals 2B-2 and 2B-3)
INJ relay Integration relay 2C-1 - 2A-4 10 kΩ or higher
2C-1 - 2A-4 Below 1 a
(when battery voltage is applied to terminals 2A-2 and 2A-3)
C/OPN relay Integration relay 2B-5 - 2B-8 10 kΩ or higher
2B-5 - 2B-8 Below 1 Ω
(when battery voltage is applied to terminals 2B-6 and 2B-7)
IG2 relay 3-5 10 kΩ or higher
3-5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
WT LH relay 3-5 10 kΩ or higher
3-5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
WT RH relay 3-5 10 kΩ or higher
3-5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
INJ2 relay 3-5 10 kΩ or higher
3-5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Air fuel ratio sensor relay 3-5 10 kΩ or higher
3-5 Below 1 Ω
(when battery voltage is applied to terminals 1 and 2)
Fuel pump relay 3-4 Below 1 Ω
3-4 10 kΩ or higher
(when battery voltage is applied to terminals 1 and 2)