Air Fuel Ratio Sensor: Installation

INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
1. Using SST, install the air fuel ratio sensor to the exhaust manifold LH
  SST 09224-00010
  
  Torque: without SST
  
  44 N*m (449 kgf*cm, 32 ft.*lbf)
  
  with SST
  
  40 N*m (408 kgf*cm, 30 ft.*lbf)
  
  Fig 1: Installing Air Fuel Ratio Sensor To Exhaust Manifold LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
  - The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) (See REPAIR INSTRUCTION ).
  - The "with SST" torque value is effective when SST is parallel to the torque wrench.
2. Connect the air fuel ratio sensor connector
INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
1. Using SST, install the air fuel ratio sensor to the exhaust manifold RH
  SST 09224-00010
  
  Torque: without SST
  
  44 N*m (449 kgf*cm, 32 ft.*lbf)
  
  with SST
  
  40 N*m (408 kgf*cm, 30 ft.*lbf)
  NOTE:
  - The "with SST" torque value is effective when using SST with a fulcrum length of 30 mm (1.18 in.).
  - The "with SST" torque value is effective when using a torque wrench with a fulcrum length of 300 mm (11.81 in.) (See REPAIR INSTRUCTION ).
    
    Fig 2: Locating Air Fuel Ratio Sensor
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  - The "with SST" torque value is effective when SST is parallel to the torque wrench.
2. Connect the air fuel ratio sensor connector.
INSTALL ENGINE AND TRANSMISSION
1. Install the engine and transmission (See INSTALLATION ).
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (See INSTALLATION )