LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, R & I >> Engine Coolant Temperature Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor: Installation

  1. INSTALL E.F.I. ENGINE COOLANT TEMPERATURE SENSOR 
    1. Install a new gasket to the E.F.I, engine coolant temperature sensor.
    2. Install the E FI engine coolant temperature sensor.

      Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

    3. Connect the E FI engine coolant temperature sensor connector.
      Fig 1: Locating E FI Engine Coolant Temperature Sensor Connector
      G05751968Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL AIR CLEANER CAP SUB-ASSEMBLY  (See INSTALLATION  )
  3. ADD ENGINE COOLANT  (See REPLACEMENT )
  4. INSPECT FOR COOLANT LEAK  (See COOLING SYSTEM )
  5. INSTALL COOL AIR INTAKE DUCT SEAL  (See INSTALLATION )
  6. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  7. INSTALL ENGINE UNDER COVER 
scientia non olet · About LEMON Manuals