LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS F >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - System & Component Testing, R & I >> Heated Oxygen Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Heated Oxygen Sensor: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  3. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  4. REMOVE FRONT DOOR OPENING TRIM COVER RH  (See REMOVAL )
  5. REMOVE FRONT FLOOR FOOTREST LH  (See REMOVAL )
  6. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) 
    1. Remove the front floor silencer pad LH.
    2. Disconnect the heated oxygen sensor connector
      Fig 1: Locating Heated Oxygen Sensor Connector
      G05751998Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the grommet.
    4. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST 09224-00010 

  7. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) 
    1. Remove the front floor silencer pad RH.
      Fig 2: Removing Front Floor Silencer Pad RH
      G05751999Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the heated oxygen sensor connector.
      Fig 3: Locating Heated Oxygen Sensor Connector
      G05752000Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the grommet.
    4. Using SST, remove the heated oxygen sensor from the front exhaust pipe assembly.

      SST 09224-00010 

      Fig 4: Removing Heated Oxygen Sensor From Front Exhaust Pipe Assembly
      G05752001Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals