October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
FUEL INJECTOR (for Direct Injection): Inspection
- INSPECT FUEL INJECTOR ASSEMBLY
NOTE:
This inspection aims at inspecting the fuel injector assemblies for opens or shorts, because the fuel injector assemblies of this vehicle are a high pressure type and cannot be inspected for fuel injection volume.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
RESISTANCE SPECIFICATION
| Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
2 01 to 2.31 Ω |
If the result is not as specified, replace the fuel injector assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002