Fuel Pressure Sensor: Removal
- PRECAUTION
CAUTION:
- Do not smoke or work near an open flame when handling the fuel system.
- Keep gasoline away from rubber or leather parts.
- Do not allow fuel to spray when removing the pipe between the high pressure side fuel pump assembly and the fuel injector assembly. The fuel in the pipe is highly pressurized.
- DISCHARGE FUEL SYSTEM PRESSURE
- Discharge fuel system pressure (See
FUEL SYSTEM ).
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See
INITIALIZATION
).
- REMOVE INTAKE AIR SURGE TANK ASSEMBLY
- Remove the intake air surge tank assembly (See
REMOVAL
).
- REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY
(See
REMOVAL )
- REMOVE FUEL PRESSURE SENSOR
- Disconnect the connector.
- Remove the fuel pressure sensor and gasket
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002